What is Pig Feeder?

 

 

A pig feeder is a specialized device or system used on pig farms to deliver feed to pigs efficiently and effectively. These feeders can be designed for various stages of pig development, from weaners to finishers, and are engineered to dispense precise amounts of food to minimize waste and ensure that each pig receives the appropriate nutrition for its growth phase.

 

Advantages of Pig Feeder

 

 

Save human effort
One feeder can feed 15 to 30 pigs, and feeding once a day is enough. Compared with the traditional feeding twice a day, the amount of feeding labor is greatly reduced and labor costs are saved.

 

Save feed
The automatic feeder feeds through pig arches. It does not feed too much at one time. It can reduce the waste caused by pigs arching out the feed or leaving it for too long. Compared with traditional pig feeding, it can save a lot of money. Small feed expenses.

 

Get pigs out of the market quickly
Compared with the traditional fixed-time and fixed-point feeding method, this product allows pigs to eat without time restrictions. As long as the pigs are hungry, they can eat without waiting or fighting. They eat a lot of food and grow quickly. The feeding cycle is shortened and the pigs can be released early.

 

Improved feed efficiency
Before a particular feed mix will start giving results, it has to be fed to the pigs for some time consistently. When pigs are fed consistently, they are better able to digest and utilize the nutrients in their feed, which can result in better growth rates and improved productivity.

  • Double Side Stainless Feeders For Pigs
    Introduction of pig farming dry/wet feeding trough The level of the health level, the humanization design of the trough, dry wet material separation trough provides a variety of feeding form. In...
  • Automatic Feeders For Pigs
    Introduction of pig farming dry/wet feeding trough The level of the health level, the humanization design of the trough, dry wet material separation trough provides a variety of feeding form. In...
  • Automatic Feeder Pan Pig Feeder Animal Feeder
    Introduction of pig farming dry/wet feeding trough The level of the health level, the humanization design of the trough, dry wet material separation trough provides a variety of feeding form. In...
  • Sow Dry-wet Feeder
    Introduction of pig farming dry/wet feeding trough The level of the health level, the humanization design of the trough, dry wet material separation trough provides a variety of feeding form. In...
  • Stainless Steel Pig Feeder For Fat Pigs
    Discription of stainless steel pig feeder The new design of stainless steel single-sided feeder, the operation is more simple, more smooth. And can be adjusted from multiple angles. In addition to...
  • Plastic Feeder Animal Feeder
    Introduction of pig farming dry/wet feeding trough The level of the health level, the humanization design of the trough, dry wet material separation trough provides a variety of feeding form. In...
  • Sow Pig Dry-Wet Feeder For Farm
    Introduction of pig farming dry/wet feeding trough The level of the health level, the humanization design of the trough, dry wet material separation trough provides a variety of feeding form. In...
  • Sow Pig Dry-wet Feeder
    Introduction of pig farming dry/wet feeding trough The level of the health level, the humanization design of the trough, dry wet material separation trough provides a variety of feeding form. In...
  • Stainless Steel Double Pig Feeder
    Discription of stainless steel pig feeder The new design of stainless steel single-sided feeder, the operation is more simple, more smooth. And can be adjusted from multiple angles. In addition to...
  • Plastic Pig Feeder
    Detail information of Plastic pig feeder /trough Plastic Feeder For Pig Farming: 2.Material:PP, 304 stainless steel bag edges 3easy to clean Specification of Plastic Feeder For Pig Farming...
  • 2018 Nipple Drinker /Nipple Drinker
    Detail information of Plastic pig feeder /trough Plastic Feeder For Pig Farming: 2.Material:PP, 304 stainless steel bag edges 3easy to clean Specification of Plastic Feeder For Pig Farming...
  • Pig Dry-wet Feeder
    Introduction of pig farming dry/wet feeding trough The level of the health level, the humanization design of the trough, dry wet material separation trough provides a variety of feeding form. In...
First 12 Last
Why Choose Us?

Rich experience

Dedicated to strict quality control and attentive customer service, our experienced staff is always available to discuss your requirements and ensure complete customer satisfaction.

Quality control

We have professional personnel to monitor the production process, inspect the products and ensure that the final product meets the required quality level standards, guidelines and specifications.

High quality

Our products are manufactured or executed to very high standards, using the finest materials and manufacturing processes.

24h online service

We try and respond to all concerns within 24 hours and our teams are always at your disposal in case of any emergencies.

What are the Advantages of Wet Versus Dry Feeding in Pig

 

Wet and dry feeding trough for pigs is a type of feeding equipment designed for pig farming. It consists of a trough with separate compartments for wet and dry feed, allowing pigs to eat both types of feed simultaneously. This type of feeding system has several advantages:Better feed conversion: Pigs tend to eat more when they have access to both dry and wet feed. This results in improved feed conversion (i.E. The amount of feed required to produce a kilogram of pork).Reduced feeding waste: The separate compartments for wet and dry feed help to reduce feeding waste as pigs cannot mix the two types of feed together.Improved pig health: The wet feed in the trough helps to keep pigs hydrated, promoting better health and reducing the risk of dehydration.Increased efficiency: The wet and dry feeding trough is an efficient and convenient way to feed pigs, reducing labor requirements and saving time.Overall, the wet and dry feeding trough is an effective way to feed pigs, improving their health and productivity while also saving time and labor for farm.

 

The advantages of wet feeding in pigs versus dry feeding are:Improved feed intake and utilization: Wet feeding provides better palatability and digestion of feed, which can improve feed intake and utilization by pigs.Reduced dust inhalation: Wet feeding can reduce the amount of dust in the pig's environment, which can reduce respiratory problems in pigs and farm workers.Enhanced gut health: Wet feeding can help maintain good gut health in pigs by providing them with adequate water and leading to a healthier gut microflora.Reduced feed wastage: Wet feeding reduces the amount of feed wastage as it is less likely to be spilled or blown away.Increased weight gain and improved feed conversion: Studies have shown that pigs fed using wet feeding have recorded better weight gain and feed conversion ratios.

Double Side Stainless Feeders For Pigs

 

Introduction to the Use Characteristics of One Side Pig Feeder

The one side pig feeder adopts a stainless steel base, with high hardness, unique design, no sprinkling, no dead ends, and it can be used by multiple pigs at the same time!

It has the advantages of smooth and beautiful appearance, reliable quality, meticulous processing, sturdiness and durability, good stability, time-saving and labor-saving, fast delivery, no waste of feed, and reduced gastrointestinal diseases. The feed trough adopts automatic feeding design, with all-weather feeding function, pigs grow evenly, and save feed, one person can feed 400 pigs, and the slaughter is about 20-30 days in advance, which improves work efficiency and reduces manpower waste.

 

Nursing Pigs and Fattening Pigs of Different Ages Cannot be Mixed

Some pig farms are building pig fatten crate or breeding sow herds when there is too much difference in the ratio between batches, or the calculation is not accurate, and the planning is improper. As a result, the pig fatten crate is not enough to be reserved, and short-term or long-term conservation of pigs occurs. The phenomenon of co-breeding with fattening pigs. On the one hand, for pig farms that are not free-feeding, nursery pigs need to be fed multiple times a day, while finishing pigs can be fed twice a day. Feeding nursery pigs will inevitably cause disturbance to the rest of the finishing pigs. It affects the rest and growth of fattening pigs; on the other hand, fattening pigs are older and get more pathogens from outside contact than nursery pigs. Pathogens in the excrement can infect nursery pigs, causing unnecessary potential risks.

Plastic Pig Feeder

 

Automated Pig Feeder Equipment 

 

 

Pig pool sounds high, automated pig feeder equipment sounds very much, in the traditional industry to today, the high intelligent automated pig equipment will become more popular, then, should pay attention to the choice what questions?

Automated pig feeder equipment:In the face of the large-scale collection of farming, scale pigs help the development space of pig equipment enterprises, with the rapid development of china's economy and scale pig, the proportion of scale pigs has increased, traditional the proportion of rural copies of pigs is rapidly reduced, and the pig industrialization process is significantly accelerated, and the intensive group is increasing year by year.

The cost of labor is not only increasing, but also faces a problem, recruiting employees is more difficult, in this regard, almost all the person in charge of the pigs in pigs have deep experience. Relying on people, it is often reliable, and it is well known to raise pigs to be strong in responsibility, how to raise pigs depends on people's responsibility, patience, and love. But people are emotional, employees and bosses may affect the production of sows. And if there is an automated implementation of the machine, it will naturally do not need to spend too much energy in person management.

 

How to Choose the Right Pig Feed

 

In industry trials, feeding pelleted feeds to finishing pigs has been shown to improve feed conversion by 5 to 8%. However, high feed costs have led producers to reevaluate the economics of feeding pellets in all phases of commercial production. Factors taken into consideration when contemplating whether to manufacture pelleted feeds include feed processing costs, particle size, pellet quality, as well as the ingredients that can be used.

 

Feed particle size comes into consideration when discussing the pelleting of pig feeds because of the potential to improve feed efficiency. Pelleted feed ingredients can be reduced to <400µ (<400 microns). In contrast, a typical meal feed particle size recommendation is 600-700µ. Reducing the average particle size of ingredients within a pellet improves digestion and nutrient absorption. However, smaller feed particle size can potentially increase the risk of stomach ulcers. One way to avoid stomach ulcers is to ensure that you’re feeding high quality pellets that hold together.

 

Pellet quality has a huge impact on a pig’s growth performance, as the amount of pellet fines can change the level of growth response, sorting, and feed waste. Processing factors, such as temperature, ingredients, and die thickness have a significant impact on pellet quality.

 

The types of ingredients used when formulating pig diets also plays a key role in pellet quality and diet costs. Ingredients that would be considered byproducts, like dried distiller grains and solubles (byproduct of ethanol) and wheat middlings (byproduct of flour milling), are potential cost savers in pig diet formulations. It is, therefore, important to be aware of how these ingredients may affect pellet quality. For example, diets containing more than 7% fat probably won’t make good pellets; and diets containing more than 18% fiber will most likely not push through the pelleting die. However, including a limited amount of higher fiber ingredients, such as wheat middlings, can help bind ingredients and make stronger pellets.

 

Choosing the Right Feeder for a Small Group of Pigs

 

 

Choosing the right feeding equipment is just as important as providing proper housing for any group of finishing pigs. Over the years, advancements in improving feeding efficiency and waste reduction has led to countless feeder options available to producers. Gone are the days where pigs were fed from the “slop bucket” or by simply throwing feed on the ground. Whether you’re raising a large group of pigs or simply growing a few animals for your family, the right feeders for pigs can make all the difference in keeping your animals healthy and growing properly, without wasting a lot of nutrients.

The feeders for finishing pigs generally fall into two categories: Gravity-flow feeders and mechanical-flow feeders. Gravity-flow feeders rely on gravity to dispense feed from a hopper into a trough or pan. On the other hand, mechanical-flow feed delivery requires a pig’s interaction with the feeder to dispense feed into a trough.
Osborne pioneered mechanical-flow feed delivery nearly 40 years ago when the big wheel made its first appearance in hog barns. Their unique mechanical flow feature means the pigs themselves – not gravity – control feed flow. Pigs can play with gravity-flow feeders and quickly unload the feed hopper, wasting countless amounts of feed. The big wheel’s unique, self-regulating feature is caused by a combination of close hopper-to-trough spacing and gravity-eliminating cone in the hopper. When the pigs stop eating, the feeder quits feeding.

The round trough of the big wheel allows pigs to spread radially allowing for more space between animals and less competition for feed access. Round troughs are self-cleaning, too. Rectangular, gravity-flow feeders force pigs into close contact at the trough. Because they must stand shoulder-to-shoulder, linear trough space is never fully used and more contact means more wasteful competition. Corners in rectangular feeders are hard to clean and feed easily becomes stale and stagnant.

In addition to more standing room for pigs, the round big wheel feeder takes up less floor space when compared to similar-size rectangular feeders. Give pigs the room they need instead of wasting floor space with bulky feeders.

 

2018 Nipple Drinker /Nipple Drinker

 

Working Principle of Pig Feeder

There is one hopper in the top of the pig feeder, which can hold very 10 liters feeds volume, the feeds drop from the doser will be storage in this hopper.There is one mechanical valve with one probe rod, which can be easily touched by the sows, when the sows touch the probe rod, the valve will be opened, the feeds will drop to the bowl for sow food in-taking;The feed drop volume can be adjusted by the valve, which can be set according to the different breeding sows, reduce the feed wasting.

 

 
FAQ
 

Q: What is feeding pigs?

A: Feeds should meet the animal's needs for maintenance, growth and reproduction. Good pig feed contains sufficient energy, protein, minerals and vitamins. Rice bran, broken rice, maize, soya-beans, cassava, vegetables and distillers' residues are often used in pig feed.

Q: What is a feeder to finish pig operation?

A: From the feeder pig stage, the animals enter a finishing stage and remain there (typically 4 months) until they reach a desired slaughter weight of between 270-285 pounds. Operations of this type are known as the feeder pig-to-finish phase, or simply the finishing phase.

Q: What do you need for feeder pigs?

A: Allow approximately four square feet of floor space for 30 to 50 pound pigs, and five square feet for 50 to 80 pound pigs. Provide one self-feeder hole for each four pigs and at least one automatic waterer for each 20 pigs with a minimum of two waterers per pen. Be sure to feed the pigs a properly balanced ration.

Q: What are the different types of pig feeders?

A: Producers can utilize traditional dry feeders, wet-dry feeders, round feeders, or tube feeders in all phases of production. Each feeder type must be managed differently, and has its own advantages and disadvantages. Objectives: Describe the forms of feed delivered to pigs for consumption.

Q: Why do we feed pigs?

A: Pigs will consume enormous amounts of food quickly. To raise and maintain a healthy stock, maximize growth and reproduction, and increase production, it is necessary to feed them the right food and a balanced diet from wean to finish.

Q: How long do you keep feeder pigs?

A: To begin, you will want to purchase feeder pigs as weaned piglets at six to eight weeks old. They are raised to market weight, 200- 250 pounds, at about 6 months of age.

Q: How much feed do you need to finish a feeder pig?

A: An average feed conversion is 3.5 pounds of grain for each pound of gain in growing-finishing hogs, or 550 to 750 pounds of feed are required to grow a hog from 40 pounds to 240 pounds live weight.

Q: What are the advantages of dry feeding pigs?

A: This leads to improved weight gain, enhanced muscle development, and overall better health of the animals. Moreover, dry feeding systems increase feed efficiency. The feed can be accurately measured and delivered to each pig's feeding station, minimizing feed losses and optimizing consumption.

Q: Are pigs feed efficient?

A: Early growing pigs convert dietary feed at less than 2:1 f/g while finishing pigs convert feed at over 3:1 f/g. The poorer feed efficiency is caused by two major factors. First, the feed required for maintenance relative to lean growth increases as the pig gets larger.

Q: What is the best feeding system in pigs?

A: Wet-dry feeder. Courtesy of chore-time. One advantage of wet-dry feeders is decreased water wastage. Research has shown that water usage dropped by 17% to 26% for pigs using a wet-dry feeder compared to a traditional dry feeder with fence attached nipple waterers.

Q: What do feeder pigs need?

A: As the pigs grow and summer arrives, be sure to provide plenty of water, shade, and adequate ventilation. Excessive heat can stress pigs as much as cold does. Raising a few feeder pigs to market weight might sound like a lot of work and worry, but it also can be fun and rewarding.

Q: How can pig feed efficiency be improved?

A: Another way we can improve feed efficiency is by increasing the nutrient density of the diets. This can either be achieved by feeding additional energy (tallow or vegetable oils) or adding enzymes such as phytase, xylanases and β-glucanases to break down indigestible fractions in the diet.

Q: Should I mix pig feed with water?

A: According to brooks [1], mixing water with dry feed and feeding after a few minutes ensures that pigs receive a more homogeneous diet and increases the rate of hydration, especially if it is finely ground, favoring the action of both digestive and in-feed enzymes.

Q: What height should a pig feeder be?

A: This popular 4.5-bushel capacity feeder holds approximately 30 pounds and weighs approximately 80 pounds empty. It is 36 inches tall and has a 31-inch diameter trough and will feed pigs from 10 pounds all the way up to market weight.

Q: Why should feeder pigs have a large frame?

A: The larger the frame size of the pig, the heavier his optimum slaughter weight. The usda feeder pig grades classifies pigs according to frame size and muscle thickness.

Q: How much space do feeder pigs need?

A: Inside a barn or shed, plan for at least 50 square feet per pig. Ideally, your pig pen would be twice as long as it is wide. An 8- by 16-foot pen would be enough so two feeder pigs could stretch their legs. Pigs kept indoors should be protected from drafts but must also have good ventilation.

Q: What do you need for feeder pigs?

A: Allow approximately four square feet of floor space for 30 to 50 pound pigs, and five square feet for 50 to 80 pound pigs. Provide one self-feeder hole for each four pigs and at least one automatic waterer for each 20 pigs with a minimum of two waterers per pen. Be sure to feed the pigs a properly balanced ration.

Q: How much water does a feeder pig need per day?

A: Daily drinking water needs for pigs range from less than 0.5 gal/ pig/day for newly weaned pigs to greater than 1.5 gal/pig/day for grow-finish pigs using nipple drinkers in warm conditions. Grow-finish pigs using bowl/cup drinkers or wet/dry feeders use less water, generally averaging just over 1.0 gal/pig/day.

Q: How long do you keep feeder pigs?

A: To begin, you will want to purchase feeder pigs as weaned piglets at six to eight weeks old. They are raised to market weight, 200- 250 pounds, at about 6 months of age.

Q: How much feed do pigs need a day?

A: On an average 4 – 8 kg swill is needed per pig per day. A breeding boar requires 2-2.5 kg concentrate per 100 kg weight depending on the age, condition and breeding demand. Feed allowances should be so adjusted that the pig is neither fatty nor run down. Greens should be provided if kept indoors.

We one of the leading pig feeder manufacturers in China, providing the best quality pig feeder with competitive price. Welcome to contact our factory to place orders.

Pig Dry wet Feeder, 2018 Nipple Drinker, Iron Cast Pig Feeder
Send Inquiry